This is a new 2 section hydraulic gear pump used on the following Bobcat skid steer loader machines:

Bobcat model 853 High Flow all serial numbers, Bobcat model 2410 MTC (Multiple Tool Carrier) articulating front loader AFTER serial number 13001.

This exactly replaces Bobcat part number 6665552.

This two section gear pump has a 3/4 inch 11 spline shaft that extends 1.25 inches from the mounting flange. A #16 o-ring boss inlet port, a #12 o-ring boss outlet port, and another #8 o-ring boss outlet port. The mounting gasket and all o-rings are included with this pump.

Sometimes we get asked "Can I put this pump on my machine and have high flow hydraulic?" Our answer is: The High Flow option is not just a different pump,it is an additional hydraulic circuit. Not only do you need this bigger pump, but you also need the rest of the circuit including valving, tubes and hoses, controls and other parts. We recommend looking for a used High Flow machine as it is easier and probably cheaper to trade up to a used High Flow machine than it is to install the option on your machine.

Here are some links to the most common 863 and 873 standard flow pumps.

Early standard flow machines primarily use a 6665551 Hydraulic pump.

Late standard flow machines primarily use a 6673911 Hydraulic pump.