John Deere 14, 70 Late Model Motor High Torque

This is a new high torque drive motor used on later model John Deere 14 and 70 series skid-steers.  It replaces John Deere part numbers GG250-32335.

The serial number breaks follow:

John Deere model 14 - skid-steer serial number 00301 and up

John Deere model 70 - skid-steer serial number 002341

Displacement: 82.6 cm/r 5.04 in/rev

Shaft: 1 Inch, 15 tooth splined

Shaft extension: 1 1/2 Inch

Mounting: 2-bolt

Ports: 2 - #12 work ports for drive hoses

This motor has a case drain hole in the front by the shaft, and it has a 3/8-16 tapped hole in the end of the shaft.

This motor does not come with a case drain port off shaft end of the motor. If you have a case drain line, you need motor number LPS250-32292. Some units have #10 O-ring boss sized hoses and require adapters. We sell this adapter as part number LPS230-32266.

*Since drive motors are installed new by the OEM in pairs. Loader Parts Source, Inc. always recommends changing both drive motors as they have been exposed to the same wear and tear. This could save future down time and expense.*