This is a rebuilt hydrostatic drive pump set for New Holland model L553 and L555 skid steer loaders. This replaces New Holland part number 9619036. This rebuilt unit does not include fittings or the charge supply tube. The gear pump is not included with these drive pumps, but a new gear pump can be added if needed.

A core charge of $1100 will be added if the core is not returned before the rebuilts are shipped.You will get a full refund for the core charge if it is returned completely assembled in 30 days.

You are responsible for making sure the rest of the hydraulic system is cleaned out and functioning properly. We always recommend new oil and filters and getting the drive motors cleaned out either by flushing or preferably by tearing them down, cleaning, and inspecting them while the pumps are off. We can not be responsible for failures caused by contanimation.

These skidloaders had a serial number break during production where Cessna switched to a newer pump design. The 2 pump designs are interchangable, the only external difference is that the newer design pump is slighly longer, but the mounting still works on either pump. The individual New Holland pump numbers are as follows:
(8)9605012 is the late pump closest to the engine.
80276806 (was 276806) is the early pump closest to the engine.
(8)9605013 is the late pump farthest from the engine.
(80)276805 is the early pump farthest from the engine.

You may get either the late or the early design depending on what cores are available. These pumps are available individually too.
One of these numbers should be stamped into the mounting flange of your pump:70344RAL , 70444RAJ , 70344RAM , 70444RAK