This shaft is used in the Scat Trak model 1300D and 1300C late model (after serial number 1300-2229) and the Volvo MC60 skidloader hydraulic drive motor. When this machine is used extensively in an application were there is load on only the front or rear axle at high speed (such as manure scraping) there is a problem of these bearings going out. Since the preload is not adjustable, the assembly needs to be replaced. These are new shafts with new bearings installed to the correct preload in the factory. The output end is 1 1/2" 17 spline. The Scat Trak part number 8032247 changes to a Volvo part number 11710594. If you need the seal kit to install this shaft kit is it available through Loader Parts Source, Inc. as LPS11710610

We can install this shaft into your motor for an additional $200 if you ship your motor to us at your cost.