Search results for: 'reman shaft assembly for drive motor to replace volvo oem 11710594'

Shaft Output 1.5, 17 T-External, 12 Internal Splines

Shaft End Seal Kit is OEM 11710610

**NOTE When this machine is used extensively in an application where there is load on only the front or rear axle at high speed (such as manure scraping), there is a problem with these bearings going out. Since the preload is not adjustable, the assembly needs to be replaced.

Shaft Diameter: 1¾, 13 splined teeth

Shaft Diameter: 1¾, 13 splined teeth

Shaft Diameter: 1½, 17 splined teeth

This Shaft measures 9 1/4 inches long.

Shaft: 28 teeth, 16 inner splines

REMAN - Drive Motor Shaft Assembly to replace Case OEM 324600A1

This item is built to order only. We need your core to rebuild. Build times may vary. Please call for our current turnaround time.

See Serial Number Breaks in details below

• For use on Case skid steer models: 40XT, 75XT
• Serial Number Break: 

40XT - North American models w/ mechanical brakes
75XT - Before JAF0318181

Output Shaft 1.5" Diameter, 17 T-External, 12 Internal Splines 

Shaft End Seal Kit is OEM 8032419

**NOTE When this machine is used extensively in an application where there is load on only the front or rear axle at high speed (such as manure scraping), there is a problem with these bearings going out. Since the preload is not adjustable, the assembly needs to be replaced.

See Details for More Information

See details for more information

13T, 1.73 inch, 3/8-16 UNC tap

See Details for More Information.

Swashplate Assembly/Yoke for the Drive Pump to replace Volvo OEM 11712073

• Single Hydrostatic Pumps need 1 Swashplate.
• Tandem Hydrostatic Pumps need 2 Swashplates.

• Shaft for the Front Drive Pump to replace Volvo OEM 11713831
• 15 Splined Teeth, RH Rotation

Shaft 1-1/4 Inch, Splined, 14 Teeth

This new drive shaft assembly has new bearings installed to the correct preload in the factory

See Details for More Information

• For Case Models: 1830, 1835B, 1835C, 1838 and 1840.
• 25.4 mm ID X 38.1 mm OD X 25.4 mm
• 2 Roller Bearings needed per drive motor

This Shaft Seal replaces additional New Holland part numbers 700707333, 7738271, 80274352, 1260905C1, V65440, 1260905C2, 93409C1, and D63349.

For New Holland Models 

L160, L170, LS170, L554, L553, L555, L565, LX565, LX665

For John Deere Models 

70, 14, JD24A, 24A, 125

See Details for More Information