Search results for: 'scat trak 1300c 1300d 1300hd 1500c 1500cx 1500d alternator'

18 pistons (9 per rotating group) required per pump.

These are sold as a set of 9.

See Details for Important Information

3 Pins are needed per Rotating Group.

• Lucas 12V Alternator to replace Scat Trak OEM 11711978
• For Scat Trak Models: 1750D, 2000D, and 2300D.

See details for more information

See details for more information

See Details For More Information

See dedtails for more information

Replaces the 10 x 16.5 pneumatic size tire.

Overall Diameter: 30

Section Width: 9

Tread Width: 8.7

Tread Depth: 63/32

See Details for more information.

This Cable will not work on the Hydraulic Valve.
There are 2 used on each machine, but usually only 1 will break at a time.

See details for more information about this Bearing and Seal Kit

See Details for Serial Number Breaks.

Please Note: This seal kit is for the front end of the motor only. It is needed when replacing the drive shaft.

1 Set - (2Keys)

• Overall length: 103".
• For Scat Trak models: 1300C, 1300CX, 1300D, 1500C, 1500CX, 1500D, 1500DX, 1700C, 1700CX, 1750D, 1800C, 1800CX, 2000D, 2000DX, 2300D, and 2300DX.
• See Serial Number Breaks in Details Below.

59-1/4 inches end to end. Threaded on one end.

See details for more information

Set Includes:
(1) Bearing
(1) Race

See Details for More Information

See details for more information

See Details for More Information

1 inch Shaft,  15T Splined, 1.5" Extension, 26T on Back End

See details for more information